Peerless-AV DS508 - Installation - Manual (Page 8)

8 of 9 ISSUED: 03-05-09 SHEET #:125-9054-4 07-11-11
4
Attaching Adapter Plate to Screen
Attaching adapter plate to dedicated adapter plates:
Using the hole pattern shown in detail 3, attach the adapter plate (B) to dedicated adapter plate with four
M10 x 15 mm screws (I) as shown in fi gure 4.2. Tighten screws using 6 mm allen wrench (not included).
DEDICATED
ADAPTER PLATE
Attaching adapter plate to screen with
VESA hole pattern:
Choose hole pattern and fasteners shown in detail 2 for
mounting screen with VESA mounting patterns. Hand thread
screws (F, G or H) through washers (J or O) and adapter
plate (B) into screen as shown in fi gure 4.1. Screw must
make at least three full turns into the mounting hole and fi t
snug into place. Securely tighten screws.
• If screws don't get three complete turns in the screen
inserts or if screws bottom out and bracket is still
not tightly secured, damage may occur to screen or
product may fail.
WARNING
B
SCREEN
F, G or H
J or O
DETAIL 3
MOUNTING PATTERN FOR
DEDICATED ADAPTER PLATES
fi g. 4.1
B
I
fi g. 4.2
VESA ® 200 x 100 VESA ® 200 x 200 VESA ® 100 x 100
MOUNTING PATTERNS
M4 x 12 mm screws (F) with #8
washers (J) or M5 x 12 mm screws
(G) with 1/4" washers (O)
M4 x 12 mm screws (F) with
washers (J), M5 x 12 mm screws (G)
or M6 x 12 mm screws (H)
with 1/4" washers (O)
M5 x 12 mm screws (G) or
M6 x 12 mm screws (H) with
1/4" washers (O)
DETAIL 2