Peerless-AV SF630-AW - Installation - Manual (Page 6)

6 of 26 ISSUED: 09-19-11 SHEET #: 203-9040-1
Attaching Hook Bracket to Flat Panel Display Using VESA 75 and 100 mm
Mounting Patterns
Thread M5 screws (C) onto hook bracket (B)
making the screws fl ush with bracket as shown in
fi gures 2.1 and 2.2.
2
B
C
C
B
fi g. 2.1 fi g. 2.2
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (B) to back of display using four M4 screws
(F) as shown below.
FOR VESA 75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (B) to back of display using four M4 screws
(F) as shown below.
*NOTE: If hole pattern is in a pocket, attach hook
bracket (B) to back of display using four M4 x 20
mm screws (G) and four spacers (H) as indicated
below.
• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
WARNING
3
B
B
F
F
*For displays with a
hole pattern in a pocket,
spacers (H) go between
hook bracket (B) and
display.
H