Peerless-AV FDS-3250 - Installation - Manual (Page 4)

ISSUED: 03-07-06 SHEET #: 090-9110-5 11-20-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
4 of 4
B
A
M
J
To restrict swivel insert one 1/4-20 x 1/2” screw
bolt (J) and one 1/2” spacer (M) into appropriate
slot as shown below in detail 1.
© 2006 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Pre-install eight M5 x 10 mm socket pin screws (E) in
rotation box (A) and base (B) leaving 1/8” thread
exposed as shown in detail 2. Hook keyhole slots of
rotation box cover (C) and base cover (D) over exposed
thread of screws. Tighten all eight M5 x 10 mm socket
pin screws (E) with security allen wrench (G). Attach
rubber edge trim (O) to base cover (D).
C
D
B
A
1/8”
DETAIL 2
Run cords from screen through cord management holes
in base (B) as shown below.
Note: In order to run cords through cord management hole, there
must be a hole cut into the desktop to allow the cords to exit the
mount.
B
cord management holes
E
DETAIL 1
60°
0°
40°
O