Zanussi ZBB25430SA - Manual (Page 25)

• Loosen the upper
pin and remove the
spacer.
• Remove the upper
pin and the upper
door.
• Loosen the middle
hinge.
• Remove the lower
door.
• Loosen the lower
pin.
On the opposite side:
• Install the lower pin.
• Install the lower
door.
• Tighten the middle
hinge.
• Install the upper
door.
• Tighten the spacer
and tighten the up-
per pin.
Ventilation requirements
The airflow behind
the appliance must
be sufficient. 5 cm
min. 200cm 2
min.
200cm 2
Installing the appliance
Caution! Make sure that the mains cable
can move freely.
Do the following steps:
25
www.zanussi.com