beautypg.com

What to do if – Zanussi ZBB25430SA User Manual

Page 22

background image

Warning! Never use sharp metal tools to
scrape off frost from the evaporator as you

could damage it.
Do not use a mechanical device or any artificial
means to speed up the thawing process other
than those recommended by the manufacturer.
A temperature rise of the frozen food packs,
during defrosting, may shorten their safe
storage life.

Periods of non-operation

When the appliance is not in use for long peri-
ods, take the following precautions:

disconnect the appliance from electrici-

ty supply

• remove all food

• defrost (if foreseen) and clean the appliance

and all accessories

• leave the door/doors ajar to prevent unpleas-

ant smells.

If the cabinet will be kept on, ask somebody to
check it once in a while to prevent the food in-
side from spoiling in case of a power failure.

What to do if…

Warning! Before troubleshooting,
disconnect the mains plug from the mains

socket.
Only a qualified electrician or competent
person must do the troubleshooting that is not
in this manual.

Important! There are some sounds during
normal use (compressor, refrigerant
circulation).

Problem

Possible cause

Solution

The appliance does not
operate. The lamp does
not operate.

The appliance is switched off.

Switch on the appliance.

The mains plug is not connected to
the mains socket correctly.

Connect the mains plug to the mains
socket correctly.

The appliance has no power. There
is no voltage in the mains socket.

Connect a different electrical appli-
ance to the mains socket.
Contact a qualified electrician.

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

The lamp is defective.

Refer to "Replacing the lamp".

The compressor operates
continually.

The temperature is not set correct-
ly.

Set a higher temperature.

The door is not closed correctly.

Refer to "Closing the door".

The door has been opened too fre-
quently.

Do not keep the door open longer
than necessary.

The product temperature is too
high.

Let the product temperature de-
crease to room temperature before
storage.

The room temperature is too high.

Decrease the room temperature.

Water flows on the rear
plate of the refrigerator.

During the automatic defrosting
process, frost defrosts on the rear
plate.

This is correct.

22

www.zanussi.com