Peerless-AV HLG452-PH-Q10 - Installation - Manual (Page 3)

ISSUED: 08-25-09 SHEET #: 090-9188-3 09-14-11
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
3 of 5
1
Use lock-down plate ( A) as a template to mark
location of holes, point 1 and point 2, approximately
7" apart on table. Drill two holes using a 1/4'' drill bit.
2
B
POINT 1 POINT 2
A
Slide two 1/4-20 x 1 3/4" bolts ( B) through slots as
shown below.
NOTE: 2 1/4" carriage bolts (ACC939) are
available for use with thicker mounting surfaces.
TABLE TOP
7"
(178 mm)
B.
DISPLAY MODEL HOLE PATTERNS
A.
SCREWS SUPPLIED BY DISPLAY
MANUFACTURER
SCREWS SUPPLIED BY DISPLAY
MANUFACTURER
42HF7945D/27
37HFL5560D/27
42HFL55860D/27
42HFL7945D/27
42HFL7580A/27
52HFL5580D/27
SBP240M/27
SCREWS SUPPLIED BY DISPLAY
MANUFACTURER
26HFL5830D/27
32HFL5460D/27
32HFL5860D/27
32HFL7560D/27
32HF7965D/27
32HFL7965D/27
C.