Warning, Ef e – Peerless-AV SR1M - Installation User Manual

Page 13

13 of 13

ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11

Cord Management

Run cords through upright (G) using cord management holes.

CORD

MANAGEMENT

Peerless is a registered trademark of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

Mounting and Removing Flat Panel Screen

Hook adapter brackets (F) onto universal plate (E),
then slowly swing screen in as shown. Turn
screws of adapter plate (F) clockwise at least six
times to prevent screen from being removed as
shown in detail 4.
NOTE: Tighten using 4 mm allen wrench (N).

Screen can be adjusted horizontally if desired.

NOTE: It is important to lock screen down! To
lock the screen down, fully tighten screws to adapter
bracket as shown in detail 4.

To remove screen from mount, loosen screws,
swing screen away from mount, and lift screen off of
mount.

• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.

WARNING

DETAIL 4

SCREWS