Peerless-AV HS432-002 - Installation - Manual (Page 4)

ISSUED: 09-07-07 SHEET #: 124-9114-1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.
4 of 6
Extend slideout assembly (A) and insert premounted studs of base tube (E) into top holes of slideout assembly. Be
certain pilot hole faces toward the back. Secure base tube to slideout assembly using three 1/4-20" nylock nuts (J)
as shown figure 1.1.
Insert two bushings (L) into top and bottom of base tube (E) as shown figure 1.2.
A
E
J
L
Insert two bushings (L) into adapter support tube (C). Place spacer (M) onto pilot pin of swivel tube (D). Insert swivel
tube (D) from underneath slideout assembly, through base tube (E) and into adapter tube (C). Ensure pilot pin of
swivel tube (D) extends into swivel slot of slideout assembly (A) as shown in figure 2.2. Insert end cap (K) into top
bushing (L).
Align holes on adapter support tube (C) and swivel tube (D) and secure with two 1/4-20 x 1/2" socket pin security
head screws (G) as shown in figure 2.3.
1
2
fig. 1.1
fig. 1.2
fig. 2.1
fig. 2.2
fig. 2.3
E
A
L
K
L
C
L
E
A
D
M
C
G
SWIVEL
SLOT
PILOT PIN
D
PREMOUNTED
STUDS
PILOT PIN
PILOT HOLE