PowerWalker Battery Pack for VI 1000_1500RT LCD - Manual (Page 24)

EN
will return to current setting item.
6. Exit Settings mode: Press and hold the Enter button for 3 seconds or
button for 0.5 second to exit setting mode.
4.4 Configuring UPS for EBM Numbers
To ensure the LCD displays the correct battery volume, configure the UPS for the
correct number of EBMs:
Note: 1 KVA E-model has no EBM,can not configure.
1. Enter settings mode: Press
more than 3 seconds to enter setting
mode.
2. Select settings items: Press to select setting items as “EbM”.
3. Enter settings item: Press more than one second to enter the setting
item.
4. Select setting value: Press the Select button to select the number of
EBM according to your UPS configuration.
5. Confirm settings: Press and hold the Enter button one second, ups will
return to current setting item.
6. Exit Settings mode: Press and hold the Enter button for 3 seconds or
button for 0.5 second to exit setting mode.
4.5 Configuring Green Function
Green Function is that when an insignificant amount of load is detected, the UPS
will shut down output automatically on battery mode.
The green function is disabled on default mode and user can configure Green
Function through the display:
1. Enter settings mode: Press more than 3 seconds to enter setting
mode.
2. Select settings items: Press to select setting items as “GF”.
3. Enter settings item: Press more than one second to enter the setting
item.
4. Select setting value: Press the Select button to select “001”.
5. Confirm settings: Press and hold the Enter button for one second, ups
will return to current setting item.
6. Exit Settings mode: Press and hold the Enter button for 3 seconds or
button for 0.5 second to exit setting mode.