Important safety instructions – PowerWalker Battery Pack for VI 1000_1500RT LCD User Manual
Page 2
EN
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS – This manual contains important instructions for
models PowerWalker VI 1000/1000E/1500/2000/3000 RT LCD that should be
followed during installation and maintenance of the UPS and batteries.
•
This product is specially designed for PCs and it is not recommended for use in
any life-supporting system and other specific important equipment.
•
This equipment can be operated by any individual with no previous training.
•
Do not plug household appliances such as hair dryers to UPS receptacles.
•
This unit intended for installation in a controlled environment (temperature
controlled, indoor area free of conductive contaminants). Avoid installing the
UPS in locations where there is standing or running water, or excessive
humidity.
•
Risk of electric shock, do not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personnel.
•
The utility power outlet shall be near the equipment and easily accessible. To
isolate UPS from AC input, remove the plug from the utility power outlet.
•
If UPS is to be stored for a long time, it is recommended to recharge the
batteries (by connecting the utility power to UPS, switch “ON”), once a month for
24 hours to avoid a full battery discharge.
•
Please do not use the UPS in excess of the rated load capacity.
•
The UPS contains one/two large-capacity batteries. So the shell shall not be
opened, otherwise such dangers as electric shock will be caused. If any internal
overhaul or replacement of the battery is required, please contact the distributor.
•
The internal short circuiting of the UPS will lead to dangers such as electric
shock or fire, therefore, no water containers (such as a water glass) shall be
placed on the top of the UPS so as to avoid such dangers as electric shock.
•
Do not dispose of battery or batteries in a fire. The battery may explode.
•
Do not open or mutilate the battery or batteries. Released electrolyte is harmful
to the skin and eyes. It may be toxic.
•
Icon
Φ
on the rating label stands for phase symbol.
•
A battery can present a risk of electrical shock and high short circuit current.
The following precautions should be observed when working on batteries :