PowerWalker VI 750R - Manual (Page 40)

10. SOFTWARE INSTALLATION
After the UPS has been installed, you must install the software (Smart Power) that
came packaged with your UPS. Smart Power monitoring software performs
the monitoring and controlling functions. This software displays the status and
diagnostic symptoms on the monitor. In case of the power failure, it provides the
auto shutdown for the computer.
Please use the following serial number (CD and download version) for Smart
Power UPS software: 726T25-4791-2N39546.
When your computer restarts, the Smart Power UPS software will appear as a
green plug icon located in the system tray, near the clock.
38
40