Additional battery installation setup – PowerWalker VI 750R User Manual
Page 28
5. ADDITIONAL BATTERY INSTALLATION SETUP
1500/2000VA and 3000VA include external battery port that allow to
provide additional battery runtime. 1500/2000VA model has no internal
battery,and 3000VA has designed an internal battery inside the UPS.
Caution: Connecting battery cable to external battery port may occur
sparkle if adding up additional battery.
Follow the procedure to install additional battery as below.
VI-1500R / 2000R
There are two external battery ports for each side of UPS itself and
battery pack.
1. Connect the battery cable to the external battery port of the rear of
UPS.
2. Then connect the supplied battery cable from extended battery
module to the external battery port of the rear of previous UPS.
3. If continuing to add up extended battery pack, repeat above steps.
Additional battery connection in rack form
29
28