PowerWalker VFI 3000R - Manual (Page 7)

12
2KVA / 3KVA Rack Mount Case
1. Input Socket 7. SNMP Intelligent Slot (Option)
2. Remote Control
(Detachable LCD Panel, Option)
8. Fax / Modem (Surge Protection)
3. External Battery Socket 9. Output Socket (NEMA or IEC)
4. Output Terminal 10. Fan
5. DB 9 (RS-232) Interface Port
11. Remote Control
(Mini LCD for LED panel only, Option)
6. Breaker
13
4. CABLE CONNECTION
4.1 Inspection
1. The system may be installed and wired only by qualified electricians in
accordance with applicable safety regulations.
2. When installing the electrical wiring, please note the nominal amperage of
your incoming feeder.
3. Inspect the packaging carton and its contents for damage. Please inform
the transport agency immediately should you find signs of damage. Please
keep the packaging in a safe place for future use.
4. Please ensure that the incoming feeder is isolated and secured to prevent
it from being switched back on again.
4.2 Connection
1. UPS Input Connection
If the UPS is connected via the power cord, please use a proper socket
with protection against electric current, and pay attention to the capacity of
the socket.
2. UPS Output Connection
The output of this model is with socket-types only (NEMA or IEC). Simply
plug the load power cord to the output sockets to complete connection.