PowerWalker Battery Pack for VFI 1000_1500 LCD - Manual (Page 6)

2-2 Installation and Setup with UPS
Unpacking & Inspection
1.
Remove the battery pack from the packing.
Note: The battery pack is very heavy, be cautious when unpacking and
lifting the unit to avoid injury.
2. Check the inside package
Battery pack unit
User manual
Battery connection cable x 1
Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the battery bank and extend the life of
the batteries. Please follow the instructions below:
1. Keep at least 20cm (8 inches) clearance from the rear panel of the unit from
the wall or other obstructions.
2. Do not block the air-flow to the ventilation openings of the unit.
3. Please ensure the installation site environmental conditions are in
accordance with the unit’s working specifications to avoid overheat and
excessive moisture.
4. Do not place the unit in a dusty or corrosive environment or near any
flammable objects.
5. This unit is not designed for outdoor use.
Connecting with UPS and Other Battery Pack
Follow below installation chart to connect with UPS and other battery pack with
included cable.
Second battery pack First battery pack UPS