PowerWalker Battery Pack for VFI 1000_1500 LCD - Manual (Page 5)

2. Installation and Setup
NOTE: Before installation, please inspect the unit. Be sure that nothing inside
the package is damaged. Please keep the original package in a safe place for
future use.
2-1 Rear Panel View
6x battery pack 12x battery pack 18 battery pack
Battery pack rack
1. DC connector : connects to either UPS or 2
nd
battery pack
2. DC breaker:
Battery over-current protection breaker
Easy swap battery: When switching battery, put the position of the
breaker in “O” position. In case there is 2
nd
(or next) battery pack
connected with the battery bank, the DC voltage from the UPS Bat.+/-
will flow through without any interruption to the 2
nd
Battery Bank.