GlowShift 7 Color Series 3,34 Inch In-Dash Tachometer Gauge w_ Shift Light User Manual
Page 2
Additional Installation Information & Material Requirements
GlowShift Gauges Approved Conductor Wires: Successfully installing GlowShift Gauges may require lengths of wire (sizes and quantity
depend on vehicle, gauge type, gauge location and / or sensor location). For correct and proper GlowShift Gauge installation and operation, the
use of 18 Gauge (wire diameter) automotive grade conductor wire with sheathing is recommended for one or more gauges per vehicle. When
installing and routing wires from the engine compartment, to inside the vehicle cabin, always employ the use of a rubber grommet. This will
prevent and deter the stripping of power supply and / or sensor wires that is necessary to deliver vital statistics about your engine to your
GlowShift engine monitoring instruments. Never use wire nuts to fasten or bound vehicle / gauge or sensor wiring. Always use securing crimp
connectors or solder individual wire junctions together for optimum gauge installation and operation.
GlowShift Gauges Approved Installation Accessories: GlowShift Gauges may require the installer or user to provide additional products,
accessories or adapters for the correct installation and operation of a gauge or sensor, as per the GlowShift Installation Instructions. When
installing and routing hoses to or from the engine compartment, to inside the vehicle cabin, always employ the use of a rubber grommet. This
will prevent and deter the stretching or pinching of hoses that is necessary to deliver vital statistics about your engine to your GlowShift engine
monitoring instruments.
GlowShift Gauges Installation Instructions: Installation documents are solely to provide a guide for individuals that are mechanically and
electronically able to install products. If you are unsure about the correct procedure of installation for a product or device, you should consult a
licensed professional.
ONE YEAR NON-TRANSFERRABLE LIMITED WARRANTY AND DISCLAIMER
GlowShift Gauges, LLC ("GlowShift") warrants to the original retail consumer purchaser, and not any other purchaser or subsequent owner, that this
Product will be free from defects in material or workmanship for a period of one (1) year from the purchase date.
For a period of one (1) year from the date of purchase, at no charge to the Purchaser, GlowShift will repair or replace this Product if it is determined
by GlowShift to be defective. After the warranty period, the Purchaser must pay all charges for parts and labor.
Coverage under this warranty is only valid within the United States, including its territories, as well as in certain other countries. Purchasers should
check our web
to determine the warranty coverage in the countries in which they are located.
GlowShift does not warrant the installation of the Product, which is the sole responsibility of the Purchaser. Installation should be done by
licensed professionals. Improper installation may cause damage to the Product and any vehicle in which it is installed, and may cause burns and
electrical injury to individuals. GlowShift’s warranty does not cover any expenses incurred in removing Products that are defective or re-installing
replacement Products in their place.
During the warranty period, to have the Product repaired or replaced, the Purchaser must return the Product, freight prepaid by the Purchaser, to
GlowShift (but for customers in the contiguous United States, GlowShift will pay the shipping charges if any Product fails during the first thirty (30)
days after purchase). The Product must be returned in its original carton or in a similar package affording an equal degree of protection. GlowShift
will return the repaired or replaced Product, freight prepaid, to the Purchaser. GlowShift does not provide Purchasers with temporary replacement
units during the warranty period or at any other time.
This limited warranty is non-transferrable and will automatically terminate if the original retail consumer purchaser resells the Product or transfers
the vehicle in which the Product is installed. An “original retail consumer purchaser” is a person who originally purchases the Product, or a gift
recipient of a new Product that is in its original packaging and unopened.
This limited warranty is subject to all of the following terms and conditions:
TERMS AND CONDITIONS
1. NOTIFICATION OF CLAIMS; WARRANTY SERVICE: If Purchaser believes that a Product is defective in material or workmanship,
written notice with an explanation of the claim shall be given promptly by Purchaser to GlowShift. All warranty claims must be made within the
warranty period, and any Products returned to GlowShift must be shipped in accordance with GlowShift’s procedures (including use of RMA
numbers supplied by GlowShift after notification). The repair or replacement of any Product or part thereof shall not extend the original warranty
period. The specific warranty on the repaired part only (not including gauge sensors) shall be in effect for a period of ninety (90) days following the
repair or replacement of that part, or the remaining period of the Product warranty, whichever is greater. GlowShift does not provide a warranty on
replacement gauge sensors.
2. EXCLUSIVE REMEDY; ACCEPTANCE: Purchaser's exclusive remedy and GlowShift's sole obligation is to supply (or pay for) all labor
necessary to repair any Product found to be defective within the repair or replacement fails to remedy the defect. Purchaser's failure to make a claim
as provided in paragraph 1 above or continued use of the Product shall constitute an unqualified acceptance of such Product and a waiver by
Purchaser of all claims thereto.