beautypg.com

American Car Craft Dodge Viper Brake Caliper Covers with Viper Head Logo Rear 2Pc Polished 2000-2001 User Manual

American car craft instructions

background image

AMERICAN CAR CRAFT INSTRUCTIONS

2000-2001 VIPER Rear Bake Caliper Covers 2Pc - Polished

Part # 962034

PART INCLUDED:
1-Right Side Caliper Cover with Viper Head Logo
1-Left Side Caliper Cover with Viper Head Logo
1-Tube Adhesive Promoter


1. Jack up your viper and set on jack stands for safety then remove one front wheel and one rear

wheel.


2. Before you take the protective liner off each part - Hold a caliper cover up to each wheels caliper to

make sure it fits properly on your Viper. Now that you know that each cover will fit your car you can remove
the remaining wheels from your Viper.


3. Thoroughly scrub clean all four calipers. It is crucial that this step be done completely thoroughly to

insure a good reliable bond. Apply some common masking tape to all the areas to see if you have achieved a
tack able surface. If the masking tape sticks then swipe the area of the calipers to be mounted with the
adhesive promoter provided.

This chemical is key to establish a good reliable bond long term. This chemical is not a cleaner but an

adhesive accelerator and must be used as such to insure a permanent bond