American Car Craft Challenger_Charger_Magnum_300 SRT 8 Plenum Cover Perforated 6.1L 2008-2011 - Manual (Page 2)

2. Now that you have removed some of the liner set it directly onto the plenum. Because of the angled
front you will need to force the front end of the covers angled shape warping the entire shape of the
cover slightly to allow it to adapt to the shape of the factory plenum. Once you have passed the front
area the cover will reform itself and allow you to set it into the factory cast plenum. It is the set tension
of the cover that will allow it to remain in place nice and secure. You will notice that the covers lower
edges will match the plenums valleys and shape providing a nice and stable final position providing a
beautiful high tech look to what otherwise is a kind of bulky and odd looking engine plenum.
Please call American Car Craft if you have any questions at 727.861.1500.
Thank you for your purchase and enjoy!
American Car Craft LLC
18924 Sakera Rd Hudson, FL. 34667
Ph 727.861.1500 Fax 727.861.1520
www.americancarcraft.com