American Car Craft Camaro Side View Mirror Trim "SUPERCHARGED Style Brushed 2Pc 2010-2013" - Manual (Page 2)

1. Thoroughly clean the mirrors glass and perimeter with alcohol to remove any dust /dirt
and wax.
2. Before you permanently attach the trim ring, set it onto the mirror to get and idea of
just how it will set in place and also to get a look at the overall shape. Although it should
not be necessary you may need to adjust the perimeter shape so that it matches the
mirrors edge perfectly. The stainless is very thin and will allow you to do any adjustment
by hand very easily. TECH TIP: Should any adjustments be necessary it would be best to
set the trim ring on a totally flat surface such as a Formica counter top or piece of glass.
This will help to prevent the trim ring from warping out of shape and will keep the ring to
remain totally flat.
3. After you have got a good idea how the ring will sit, slowly remove the release liner
from the back of the trim ring and then carefully set the ring in place pressing firmly
along the entire perimeter to set the ring. Pressing firmly along the edge is very important
to achieve a nice long lasting bond.
If any questions occur during installation, please contact American Car Craft at
727-861-1500.
Thank you and enjoy your purchase!
American Car Craft
18924 Sakera Rd. Hudson, FL. 34667
727.861.1500
www.AmericanCarCraft.com