American Car Craft Camaro Lower Hood Plate Polished 2010-2012 - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
CAMARO LOWER HOOD PLATE
PART#103003
PART INCLUDED:
1-Stainless Upper Hood Plate or 1-Stainless Lower Hood Cowl
2- Adhesive Promoter Packs
Your new cover comes with a protective liner; do not remove liner until installation is complete.
For the best results you will need to remove the factory hood from the vehicle.
1. The first step in removing the hood will be to create a nice stable platform in which to rest the hood
once removed. A nice table and blanket will do fine. Draw a circle around each of the four hood bolts.
This will allow you to re bolt the hood in exactly the same spot eliminating the need to adjust the hood
when you reinstall it. Detach the washer fluid line from the hood. The only real way to easily remove any
hood is with three people, two to hold the hood at each side and one to remove the bolts. An air ratchet
will work the best for this procedure. Once the hood is removed set it down exposing the underside face
up.