American Car Craft Challenger Hood Plate Polished Plain Front 2008-2013 - Manual (Page 2)

4. Once you have achieved a nice fitting contour hold the panel in position and add a
couple of marks to the panel and hood so that you will be able to set the panel at
the exact same position every time you practice placing it. This will allow you to
set it perfectly once you are ready to permanently set the panel.
5. Now that you are ready to set the panel simply remove the red release liner from
the attachment tape on back of the panel and carefully line the panel up to your
positioning marks. Once you are in position set the panel from the center working
outward pressing firmly to match the contour and shape of the hood and also to
finally set the panel in place. Remove the protective liner to finish the installation.
If any questions occur during installation please call
American Car Craft at 727-861-1500.
Thank you and enjoy your purchase!
CARE AND MAINTENANCE:
Note: Care must be taken when cleaning your cover. It is a good idea to lightly dust
your cover with a clean soft cloth first in order to prevent any particles from
scratching it. Then wipe (using a new clean soft cloth) with a good quality streak
free glass cleaner.