American Car Craft Corvette Doorsills Outer with Chrome Ribs 2Pc 2005-2013 C6+Z06+ZR1+GS - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C6 Corvette Doorsills
Part#
041008
Patent pending
PARTS INCLUDED:
2-Stainless Doorsills
2-Adhesive Promoter
2-1/8” Chrome Molding Strips
PLEASE NOTE THAT THIS IS A PERMANENT INSTALLATION AND THE
NEW DOORSILLS CANNOT BE REMOVED WITHOUT DAMAGING THE
PART. PLEASE NOTE YOUR CAR WILL NOT BE DAMAGED IN ANY WAY.
Your new doorsills come to you with a protective liner that you will remove after
installation. This will help produce a nice clean install.
1. Thoroughly clean the surface area first with soap and water then with household
isopropyl alcohol.
2. Then swipe the same area with the adhesive promoter (provided). This promoter
will guarantee a good permanent bond.
3. THIS STEP IS VERY IMPORTANT!!! Gently pre-bend the sills to fit. The
metal is flexible enough to allow you to gently curve it so that the sills fit and
conform to the door area without forcing it to lay flat. You want the doorsills
to look like they are attached (to conform to the shape of the car without any
of the doorsill sticking up from the car) to the car before you actually remove
the red liner.
4. When you are satisfied with the fit, remove the red liner from the attachment tape
and firmly press.