beautypg.com

American Car Craft Corvette Side Vent Grilles 2Pc Perforated 1997-2004 C5 & Z06 User Manual

Page 2

background image


8. You have been supplied with two lengths of chrome trim. Should you elect to use

this trim it has been provided to be applied to the outer edge of the vent hole to
give the opening a more complete look. Before you begin installation you must
first prepare the surface by scrubbing the area with household rubbing alcohol
then swipe the area once with the remaining adhesive promoter. Begin at the inner
most center of the vent opening. Remove a small section of the red release liner as
you begin placement press the trim into position and work your way to the
corners. As you approach each corner you will need to pre-bend the trim so that it
takes the shape of the corner without forcing it. Once you have achieved this press
the trim with some force into each corner this will ensure the trim maintains a
permanent shape. As you approach the start point snip the excess trim off with a
scissors leaving a little extra length so that you will have to buckle the trim into a
nice tight butt seam.


9. Repeat steps 1-8 for opposite side.



If any questions occur during installation please call American Car Craft at 727-861-

1500.

Thank you and enjoy your purchase!

AMERICAN CAR CRAFT

18924 SAKERA ROAD-HUDSON FLORIDA 34667

Phone # 727-861-1500 Fax # 727-861-1520

www.americancarcraft.com