American Car Craft Corvette Driving Light Covers Polished Billet Style 2005-2013 C6 only - Manual (Page 2)

until you have achieved a nice perfect conformed fit to your factory lens cover
without forcing. At this time you will need to make note of just how the cover sits
in place making sure it sits nice and centered on the factory lens.
3. Once all preparations have been made and you are clear on just how the stainless
cover places on the lens you can now remove the release liner from the back of
the lens and carefully place the cover into position pressing firmly to set.
4. Repeat the entire process for the opposite side. Do not get wet for 24 hours.
Note: Care must be taken when cleaning your covers. It is a good idea to lightly dust
your covers with a clean soft cloth first in order to prevent any particles from
scratching them. Then wipe (using a new clean soft cloth) with a good quality streak
free glass cleaner.
If any questions or problems occur during installation, please contact
American Car Craft at 727-861-1500.
Thank you and enjoy your purchase!
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520
www.americancarcraft.com