American Car Craft Corvette Rear Bumper Grilles 2Pc Perforated 1997-2004 C5 & Z06 - Manual (Page 2)

2. Once the cars inner bumper has been properly prepared you can now begin
installation. Before permanently attaching the new grille place it into position to
get acquainted with how it will slide into place and with the overall fit. Although
it should not be necessary take this opportunity to make any adjustments to the
shape of the new grille so that it installs flush to the car.
3. Once you are satisfied with the fit simply pull the release liner from the
attachment tape. NOTE: Because of the attachment tape being on both the top and
bottom edges it is suggested that you put a coating of household rubbing alcohol
on at least one of the pieces of tape in order for it to slide in. Then reposition the
grille and press firmly to both the painted side and the grille side to create a nice
permanent bond.
4. Repeat steps 1-3 for opposite side.
If any questions occur during installation please call American Car Craft at
727-861-1500.
Thank you!
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520
www.americancarcraft.com