beautypg.com

American Car Craft Mustang Battery Cover Polished Stand Alone V6 & GT 2005-2009 User Manual

Page 2

background image

2. You will notice a heavy wire harness snapped into the battery tray and a

negative body ground lead strung across to the shock tower. Temporarily unbolt
this ground lead and unsnap the heavy harness and let it drop to the side of the
battery tray. Using the large zip tie provided fasten the heavy harness thru the
snap hole and fasten the harness so that it runs along the side of the battery tray
and just underneath the snap hole. Next fasten the ground lead under the tab it
was originally bolted to. Simply bolt it back under running the factory bolt
upwards until tight.


3. Once adjustments have been properly made place the battery cover over the

stock battery and place it in the notches of the battery tray. Remove protective
liner.


Note:
Care must be taken when cleaning your cover. It is a good idea to lightly dust your

cover with a clean soft cloth first in order to prevent any particles from scratching it.

Then wipe (using a new clean soft cloth) with a good quality streak free glass cleaner.

If any questions occur during installation, please contact American Car Craft at

727-861-1500.

Thank you and enjoy your new purchase.

AMERICAN CAR CRAFT

18924 SAKERA ROAD-HUDSON FLORIDA 34667

Phone # 727-861-1500 Fax # 727-861-1520

www.americancarcraft.com