beautypg.com

American Car Craft Pontiac G8 Side Marker Trim 2Pc Base GT GXP Polished 2008-2009 User Manual

American car craft instructions, Do not get wet for 24 hours

background image

AMERICAN CAR CRAFT INSTRUCTIONS

G8 SIDE MARKER LIGHT BEZELS

PART#222010patent pending

PARTS INCLUDED:
2-Stainless Side Marker Bezels
1-Adhesive Promoter Tube

Your side marker bezels are designed to attach directly on the side marker lens.

1. Clean each side marker lens with household rubbing alcohol to remove any wax and dirt then

swipe the area once with the adhesive promoter provided.

2. Place each bezel into position to familiarize yourself with each placement before removing liner.

VERY IMPORTANT: It will be necessary to hand form the bezels to conform to the shape of the
car before installing; doing this will prevent any possibility of the bezel popping loose or lifting
long term.

3. Once they are fitted properly peel the release liner from the back of each bezel and carefully set

them nice and evenly around each light. Press firmly to set.

DO NOT GET WET FOR 24 HOURS!

IF ANY QUESTIONS OCCUR DURING INSTALLATION PLEASE CONTACT AMERICAN CAR CRAFT AT

727-861-1500

Thank You and Enjoy Your New Purchase!

AMERICAN CAR CRAFT

18924 SAKERA ROAD-HUDSON FLORIDA 34667

Phone # 727-861-1500 Fax # 727-861-1520

www.americancarcraft.com