beautypg.com

American Car Craft Corvette Fender Caps Polished 2005-2013 C6+GS User Manual

American Car Craft For the car

background image

AMERICAN CAR CRAFT INSTRUCTIONS

2005-2013 C6 CORVETTE FENDER CAPS

PART#043095

patent pending

PLEASE TAKE THE TIME TO READ AND UNDERSTAND THE ENTIRE
INSTRUCTIONS BEFORE BEGINNING THIS INSTALLATION.

PARTS INCLUDED:
2-Stainless Fender Liners
1- Promoter packet

Your new accessory comes to you with a clear protective liner. This liner will help to keep your
new parts clean during installation. You will be instructed when to remove the liner during the
detailed installation.

1. To install the long narrow fender liner cap cover. In order to install this apply some of the

adhesive promoter provided over these two fender mount locations.

2. Place the cap cover in position so that the small notch aligns with the notch in the factory

inner fender.(SEE PICTURE#13) It is important that these cap covers sit very tightly to
the inner fender rubber gasket in order to achieve adequate clearances between the cap
cover and hood when closed. (SEE PICTURES #14,#15) With this in mind simply fold