American Car Craft Corvette Rear View Mirror Trim - Corvette Script 1997-2004 C5 & Z06 Standard - Manual

AMERICAN CAR CRAFT INSTRUCTION
STAINLESS STEAL REAR VIEW MIRROR TRIM CORVETTE STYLE GML
patent pending
Part#031007
PARTS INCLUDED:
___1 Stainless Mirror Trim Rings
This all new stainless trim ring accessories is an American Car Craft original idea that will add
that cool little something to your car mirrors that would otherwise just be a plain OEM mirror.
1. Thoroughly clean the mirrors glass and perimeter with alcohol to remove any dust /dirt and
wax.
2. Before you permanently attach the trim ring, set it onto the mirror to get and idea of just how it
will set in place and also to get a look at the overall shape. Although it should not be necessary
you may need to adjust the perimeter shape so that it matches the mirrors edge perfectly. The
stainless is very thin and will allow you to do any adjustment by hand very easily. TECH TIP:
Should any adjustments be necessary it would be best to set the trim ring on a totally flat surface
such as a Formica counter top or piece of glass. This will help to prevent the trim ring from
warping out of shape and will keep the ring to remain totally flat.
3. After you have got a good idea how the ring will sit, slowly remove the release liner from the
back of the trim ring and then carefully set the ring in place pressing firmly along the entire
perimeter to set the ring. Pressing firmly along the edge is very important to achieve a nice long
lasting bond.
If any questions occur during installation, please contact American Car Craft at
727-861-1500.
Thank you for your purchase!