American Car Craft Corvette Fuel Rail Covers Replacement Style w_Cap Cover Polished 2008-2013 C6+GS - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
2008-2013 C6 & GS LS3 FUEL RAIL COVERS POLISHED REPLACEMENT STYLE
PART #043053
Parts Included:
2- Stainless Installation Brackets w/Velcro attached
1-3/8” Vacuum Cap
1-Adhesive Promoter Packet
1-Decrorative Chrome Oil Cap Cover
1-Decorative Chrome Cap w/ butyl attachment putty
2- Stainless Polished Replacement Covers
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in place until
the installation is complete to prevent finger prints and or possible scratches during installation.
1. Remove the two factory fuel rail covers and set aside.
2. Starting with the driver’s side remove the two bolts securing the factory fuel rails to the plenum and
set aside for a moment. You have been supplied with two identical installation brackets. These
brackets come to you flat and have been designed in such a way as to allow you to bend them by hand
so that you can set the two holes in the bracket at the hole locations you just exposed at the base of
the fuel rail. The small notches in the brackets will allow you to bend the top portion so that it folds
over the fuel rail providing an attachment point for the new fuel rail cover. After you have successfully
formed the brackets simply reinstall the fuel rail bolts to secure the new bracket. After it’s nice and
tight tweak the shape of the bracket so that it sits nice and snug to the fuel rail.