beautypg.com

American Car Craft Mustang Shock Tower Covers Polished_Perforated 4Pc V8 & GT 5.0 2011-2012 User Manual

Page 2

background image

snug. Once you have set the cover press the top of the cover with some force so that the top area
containing the holes set into the factory bolt area.

2. You have been provided with four 8mm nuts for each cover and four chrome top hat style caps. It is

important to understand that the nuts supplied will not hold the new cover in place at all but it is the
top hats that will actually serve to attach the new covers. Install all four nuts atop the factory studs and
snug them down. With all four nuts in place simply tap the four top hats over the new nuts. You will
notice that the top hats fit very snug and will work very well to hold the new covers permanently in
position. Remove the protective liner to finish the installation.




If any questions occur during installation please call American Car Craft at 727-861-1500.

Thank you for your purchase!

AMERICAN CAR CRAFT

18924 SAKERA ROAD-HUDSON FLORIDA 34667

Phone # 727-861-1500 Fax # 727-861-1520

www.americancarcraft.com