American Car Craft Dodge Challenger 5.7 and SRT 8 Grille Polished "Shark Tooth Lower Front 2011-2013 only" - Manual

AMERICAN CAR CRAFT INSTRUCTION
CHALLENGER SHARK TOOTH GRILLE
PART # 152011
patent pending
PARTS INCLUDED:
1-Stainless Grille
1-Chrome Trim Molding ¼’’ cowls 85”
1-Adhesive Promoter Pack
Your grille comes to you with a protective liner. Do not remove liner until
installation has been completed.
This NEW Shark tooth grille from American Car Craft’s “Cruising Character Series” has
to be the most daring statement any one could apply to their vehicle with an aftermarket
accessory. Appropriately designed for the Powerful Challenger any one looking in their
rear view mirror will move out of the way! A true show stopper you will enjoy for years.
1. Thoroughly scrub the lower grille opening with alcohol to remove any and all dirt and
wax. Take a couple of extra moments to do this cleaning very thoroughly. Once you are
confident that the surface is perfectly clean, Swipe the area to be mounted with the
adhesive promoter provided. Apply a single and complete coat of the promoter and try
not to over saturate the application a single thin coat will work perfectly.
2. Before you permanently attach the new grille to the car set it in place to get acquainted
with the fitment and shape of its placement. Although it should not be necessary you may