American Car Craft Corvette Side Vent Grilles Laser Mesh 2Pc Blakk Stealth 2005-2013 C6 only User Manual
Page 2
be harmed from the detachment. In fact after installation is complete you will
simply press it back into position.
2. Now that you have created access to the vent hole itself the next step will be to
prepare two areas for attachment. Using a paper towel scrub the two inner sides of
the vent hole with alcohol to remove any road grime or dirt. Then wipe away any
residue with a fresh paper towel. Once this is done swipe the areas with the
adhesive promoter provided. NOTE: This promoter is NOT a cleaning agent. Do
not use it to clean the surfaces. It is a BONDING agent that will insure the grilles
attachment long term.
3. Although you new grilles come to you pre shaped it WILL be necessary to further
shape each grille by hand in order to achieve a nice contoured fit. You may need
to set the grilles in position with every adjustment several time before you get
them just right so BE patient. In this process you will also be training yourself
how to place the grilles for the peel and stick installation.
4. Once you have achieved a nice contoured fit simply peel the red release liner from
the grille completely and then carefully set the grille in position. Press the
attachment tape to the fender on the inside as you apply pressure with you fingers
from the outside of the fender to create a nice bond. Once you have set the grille
simply press the inner fender back in place and then reassemble the fender liner to
complete the installation.
5. You have been supplied with two lengths of chrome trim (Optional) This
trim has been supplied to be placed at the outer edge of the vent opening to
add a nice finished appearance. Simply clean the vent ridge with household
rubbing alcohol then swipe with the adhesive promoter provided. Once
preparation is complete simply peel the red release liner from the precut trim
and set in place. Pressing firmly to set.
If you have any question during installation, please call American Car Craft
At 727.861.1500.
Thank you for your purchase!
American Car Craft LLC
18924 Sakera Rd Hudson, FL. 34667
Ph 727.861.1500 Fax 727.861.1520