American Car Craft Corvette Side View Mirror Trim 2Pc Z06 Style STD 2006-2013 - Manual (Page 2)

set the trim ring on a totally flat surface such as a Formica counter top or piece of glass.
This will help to prevent the trim ring from warping out of shape and will keep the ring to
remain totally flat.
3. After you have got a good idea how the ring will sit, slowly remove the release liner
from the back of the trim ring and then carefully set the ring in place pressing firmly
along the entire perimeter to set the ring. Pressing firmly along the edge is very important
to achieve a nice long lasting bond.
If any questions or problems occur during installation, please contact American Car Craft
at 727-861-1500.
Thank You and Enjoy Your Purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com