beautypg.com

American Car Craft Corvette Air Dam Grilles Laser Mesh Polished 2006-2013 Z06+GS+ZR1 User Manual

American Car Craft For the car

background image

AMERICAN CAR CRAFT INSTRUCTIONS

C6 Corvette Z06 Stainless Laser Mesh Lower Air Dam Grilles

PART # 042045

PARTS INCLUDED:
1-Adhesive Promoter Packet
2-Laser Mesh Grille Inserts w/attachment Tape
2-Black Air Deflector Plates

1. Remove the two factory air dam screws just behind the air dam opening.

2. Set the new grille in position behind the hole and shape the grille by hand so that it
matches the shape and contour of the factory air dam and also so that the two holes in the
new grille match up with the two screw hole locations.

3. For ease of installation your new grille comes with an attachment tape. Thoroughly
clean the area where the two factory screws were removed with rubbing alcohol. Peel the
red release liner from the grille and set the grille in position. The tape has been added to
allow the grille to remain in place leaving your hands free to re-install the two factory
screws. Simply replace the two screws for each of the grilles to complete the installation.