American Car Craft Corvette Reverse Light Covers Laser Mesh Blakk Stealth 2005-2013 C6 all - Manual (Page 2)

in place making sure it sits nice and centered on the factory lens.
3. Once all preparations have been made and you are clear on just how the stainless
cover places on the lens you can now remove the release liner from the back of
the lens and carefully place the cover into position pressing firmly to set.
4. Repeat the entire process for the opposite side.
DO NOT GET WET FOR 24 HOURS!
Note: Care must be taken when cleaning your covers. It is a good idea to lightly
dust your covers with a clean soft cloth first in order to prevent any particles
from scratching them. Then wipe (using a new clean soft cloth) with a good
quality streak free glass cleaner.
If any questions or problems occur during installation, please contact American Car
Craft at 727-861-1500.
Thank You and Enjoy Your Purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com