beautypg.com

Do not get wet for 24 hours – American Car Craft Corvette Reverse Light Covers Laser Mesh Polished 2005-2013 C6 all User Manual

Page 2

background image

3. Once all preparations have been made and you are clear on just how the

stainless cover places on the lens you can now remove the release liner from
the back of the lens and carefully place the cover into position pressing
firmly to set.

4. Repeat the entire process for the opposite side.


DO NOT GET WET FOR 24 HOURS!

Note: Care must be taken when cleaning your covers. It is a good idea to lightly
dust your covers with a clean soft cloth first in order to prevent any particles
from scratching them. Then wipe (using a new clean soft cloth) with a good
quality streak free glass cleaner.

If any questions or problems occur during installation, please contact American
Car Craft at 727-861-1500.