beautypg.com

Do not get wet for 24 hours – American Car Craft Corvette Driving Light Covers Laser Mesh 2Pc Polished 2006-2013 Z06+GS+ZR1 User Manual

Page 2

background image

3. Once all preparations have been made and you are clear on just how the stainless

cover places on the lens you can now remove the release liner from the back of
the lens and carefully place the cover into position pressing firmly to set.


4. Repeat the entire process for the opposite side.


DO NOT GET WET FOR 24 HOURS!


Note: Care must be taken when cleaning your covers. It is a good idea to lightly
dust your covers with a clean soft cloth first in order to prevent any particles
from scratching them. Then wipe (using a new clean soft cloth) with a good
quality streak free glass cleaner.

If any questions or problems occur during installation, please contact American
Car Craft at 727-861-1500.

Thank You and Enjoy Your Purchase!

AMERICAN CAR CRAFT

18924 SAKERA RD HUDSON FL 34667

Phone: 727 861-1500 Fax: 727 861-1520

www.americancarcraft.com