American Car Craft Corvette Inner Fender Liner Polished Component 8Pc Illuminated 2005-2013 C6+GS - Manual (Page 7)

#23 #24
#25
Installation procedure for the Lighted Version: This part of the installation is relatively
easy but will take a little more time ….
1. The first step will be to create a 12v source for your new cover. This will require
you to choose a good location for a switch. We recommend putting it in an easy
location by the battery. This will make it very easy to use the switch and tap the
batteries positive and negative posts to supply your new cover with a reliable
power source. (The switch, and wire for this are not included.)
Note: Care must be taken when cleaning your covers. It is a good idea to lightly dust
your covers with a clean soft cloth first in order to prevent any particles from scratching
them. Then wipe (using a new clean soft cloth) with a good quality streak free glass
cleaner. SEE ENCLOSED CARE SHEET
If any questions occur during installation, please contact American Car Craft at
727-861-1500.
Thank you and enjoy your new cover!