American Car Craft Challenger Hood Cap Polished Upper 2008-2013 - Manual

AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520
www.americancarcraft.com
DODGE MAGNUM/CHRYSLER 300/CHARGER/CHALLENGER
UPPER HOOD CAP
PART # 153002
patent pending
INSTALLATION INSTRUCTIONS
Your cover comes to you with a protective liner. Do not remove liner until final
installation.
1. Remove the two bolts holding in place the hood catch cross bar. (NOTE: IF YOU
WILL BE INSTALLING OUR HEADER PLATE BE SURE TO REPLACE
THESE BOLTS WITH THE SPECIAL FLAT BOLTS THAT ARE PROVIDED
WITH YOUR HEADER PLATE). Set bolts aside.
2. NOTE: A friend would be very helpful for this next step. Placing the cross bar
back in position as you place your new insert over it and arrange its position onto
the hood so that you can achieve thru access at both hole locations. Replace the
cross bar bolts that you just removed.
If any questions occur during installation please call
American Car Craft at 727-861-1500.
Thank you and enjoy your purchase!
CARE AND MAINTENANCE:
Note: Care must be taken when cleaning your cover. It is a good idea to lightly dust
your cover with a clean soft cloth first in order to prevent any particles from
scratching it. Then wipe (using a new clean soft cloth) with a good quality streak
free glass cleaner.