American Car Craft Corvette Rear Bumper Grilles 2Pc Laser Mesh Polished 1997-2004 C5 & Z06 - Manual

AMERICAN CAR CRAFT INSTRUCTION
C5 2-pc STAINLESS REAR VENT GRILLES
PART#032022
PARTS INCLUDED:
2-Stainless Vent Grilles
2-Adhesive Promoter Packs
1. Your new grilles are designed to install from the backside of the bumper vent
opening. Before you begin you must first prepare the backside of the bumper area
by removing any and all dirt deposits that may be present first then scrub the
upper and lower areas with household rubbing alcohol. After this area has been
thoroughly cleaned swipe the same area with the adhesive promoter provided.
2. Once the cars inner bumper has been properly prepared you can now begin
installation. Before permanently attaching the new grille place it into position to
get acquainted with how it will slide into place and with the overall fit. Although
it should not be necessary take this opportunity to make any adjustments to the
shape of the new grille so that it installs flush to the car.