American Car Craft Camaro Executive Series Fluid Cap Cover 5Pc Set Synergy Green 2010-2013 V8 Auto User Manual
Page 2
1. The first step for installation will be to thoroughly scrub the tops of each of the factory
caps, the oil/water/washer fluid/brake fluid/power steering. Scrub them with alcohol to
remove any surface contaminants then swipe the tops with the adhesive promoter
provided.
2. You have been provided with 2'' furry Velcro attachment cookies for each cap. Peel the
release liner from the back of each cookie and firmly set them to the top of each factory
cap.
3. The factory wind shield washer fluid cap will need to be trimmed slightly in order for
the new cover to sit nice and centered. To do this, simply snip the finger tab as well as the
attachment strap off the cap with a scissor.
4. The set will contain a cap cover that is stuffed for the oil cap handle and a thinner
cover for the power steering cap. The remaining covers in your kit are for all other
factory caps. Simply set them in place.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com