beautypg.com

American Car Craft Chrysler 300 _ Dodge Charger_Magnum 5.7 Inner Fender Covers Polished 2005-2010 User Manual

American Car Craft For the car

background image

AMERICAN CAR CRAFT INSTRUCTION

CHRYSLER 300 STAINLESS INNER FENDER COVERS

PART # 303003

patent pending

PARTS INCLUDED:
1- Long Extension Bracket
1- ¼-20 Nut & ¾” Bolt
2- Small Black “L” Brackets w/Holes
4- #8 1” Pan Head Screws
4- Small Chrome Screw Covers w/ White Sockets
1-Adhesive Promoter Pack
2- Small Black Spacers
1- Chrome Replacement Radiator Cap
1- 1 ¼” 1/4 -20 Carriage Bolt & Flat Fender Washer with Locking Nut
1- 2” Length of Foam Rubber Tape


Your covers come to you with a protective liner. Do not remove liner until final
installation.


1. Remove the two 10mm fender bolts closest to the front of the car and install the two
small black brackets (provided) to these two areas. Tighten them down so that the
tongue of the bracket faces down.