beautypg.com

American Car Craft Mustang Master Cylinder Cover Polished w_Cap V8 & GT 5.0 2011-2012 User Manual

American car craft instructions

background image

AMERICAN CAR CRAFT INSTRUCTIONS

MUSTANG GT 5.0 2011-2012 MASTER CYLINDER COVER w/PERFORATED CAP

PART #273016

patent pending

Parts Included:
1-Stainless Master Cylinder Cover
1-Perforated Cap Cover
1-Adhesive Promoter Pack

Introduction:
This new ACC design is a truly custom look for the new mustang. It will require very little
preparation and should take just a few minutes to install.

Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in
place until the installation is complete to prevent finger prints and or possible scratches during installation.

1. Peel the protective liner from the body of your new stainless cover.

2. Remove the factory master cylinder cap and then set the new cover in place over the factory

reservoir. Then replace the factory cap.