American Car Craft Corvette Fuel Rail Covers Replacement Style w_Cap Perforated 2008-2012 C6+GS - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C6 2008-2011 + GS FUEL RAIL COVERS PERFORATED REPLACEMENT STYLE
PART #043051
Parts Included:
2- Stainless Installation Brackets w/Velcro attached
1-3/8” Vacuum Cap
1-Adhesive Promoter Packet
1-Decrorative Chrome Oil Cap Cover
1-Decorative Chrome Cap w/ butyl attachment putty
2- Stainless Perforated Replacement Covers
Introduction:
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in place until
the installation is complete to prevent finger prints and or possible scratches during installation.
1. Remove the two factory fuel rail covers and set aside.
2. Starting with the driver’s side remove the two bolts securing the factory fuel rails to the plenum and set aside
for a moment. You have been supplied with two identical installation brackets. These brackets come to you flat
and have been designed in such a way as to allow you to bend them by hand so that you can set the two holes in
the bracket at the hole locations you just exposed at the base of the fuel rail. The small notches in the brackets
will allow you to bend the top portion so that it folds over the fuel rail providing an attachment point for the
new fuel rail cover. After you have successfully formed the brackets simply reinstall the fuel rail bolts to secure
the new bracket. After it’s nice and tight tweak the shape of the bracket so that it sits nice and snug to the fuel
rail.