American Car Craft Corvette Driving Light Covers Polished Billet Style 2006-2013 Z06+ZR1+GS - Manual (Page 2)

in place making sure it sits nice and centered on the factory lens.
3. Once all preparations have been made and you are clear on just how the stainless
cover places on the lens you can now remove the release liner from the back of
the lens and carefully place the cover into position pressing firmly to set.
4. Repeat the entire process for the opposite side. Do not get wet for 24 hours.
Note: Care must be taken when cleaning your covers. It is a good idea to lightly dust
your covers with a clean soft cloth first in order to prevent any particles from
scratching them. Then wipe (using a new clean soft cloth) with a good quality streak
free glass cleaner.
If any questions or problems occur during installation, please contact American Car
Craft at 727 861-1500.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com