beautypg.com

American Car Craft Corvette Executive Series Fluid Cap Cover 6Pc Set - Z06 505HP 2006-2013 Manual User Manual

Page 2

background image






1. The first step for installation will be to thoroughly scrub the tops of each of the factory caps,
the oil/water/washer fluid/brake fluid/power steering and clutch fluid if so equipped. Scrub them
with alcohol to remove any surface contaminants then swipe the tops with the adhesive promoter
provided.

2. You have been provided with 2'' furry Velcro attachment cookies for each cap. Peel the release
liner from the back of each cookie and firmly set them to the top of each factory cap.

3. The factory wind shield washer fluid cap will need to be trimmed slightly in order for the new
cover to sit nice and centered. To do this, simply snip the finger tab as well as the attachment
strap off the cap with a scissor.

4. The set will contain a cap cover that is angled for the oil cap and a thinner cover for the power
steering cap. The remaining covers in your kit are for all other factory caps. Simply set them in
place.


If you have any questions during installation please call American Car Craft at 727-861-

1500.

Thank you and enjoy your new purchase.

AMERICAN CAR CRAFT

18924 SAKERA ROAD-HUDSON FLORIDA 34667

Phone # 727-861-1500 Fax # 727-861-1520

www.americancarcraft.com