American Car Craft Corvette Rear View Mirror Trim - Corvette Script 2005-2012 C6 Standard Mirror - Manual (Page 2)

set the trim ring on a totally flat surface such as a Formica counter top or piece of glass.
This will help to prevent the trim ring from warping out of shape and will keep the ring to
remain totally flat.
3. After you have got a good idea how the ring will sit, slowly remove the release liner
from the back of the trim ring and then carefully set the ring in place pressing firmly
along the entire perimeter to set the ring. Pressing firmly along the edge is very important
to achieve a nice long lasting bond.
If any questions occur during installation, please contact American Car Craft at
727-861-1500.