beautypg.com

American Car Craft Mustang Master Cylinder Cover Stand Alone V6 & GT 2005-2009 User Manual

Page 2

background image

1. Peel the protective liner from the body of your new stainless cover.

2. Remove the factory master cylinder cap and then set the new cover in place over the factory

reservoir. Then replace the factory cap.

3. Scrub clean the top of the factory cap with alcohol to remove any dirt then swipe the cap with the

adhesive promoter provided. This chemical is NOT a cleaner but an adhesive accelerator and must be
used in order to expect a good long term bond.

4. Remove the Velcro half inside the decorative chrome cap provided and then peel the release liner

and press it to the factory cap. Then simply press the decorative cap in place to finish the
installation.

If any questions occur during installation please call American Car Craft at

727-861-1500.

Thank you for your purchase!

AMERICAN CAR CRAFT

18924 SAKERA ROAD-HUDSON FLORIDA 34667

Phone # 727-861-1500 Fax # 727-861-1520

www.americancarcraft.com