beautypg.com

American Car Craft Corvette Executive Series Fluid Cap Cover 6Pc Set - Z06 405HP 2002-2004 C5 & Z06 User Manual

Page 2

background image



1. The first step for installation will be to thoroughly scrub the tops of each of the factory
caps, the oil/water/washer fluid/brake fluid/power steering and clutch fluid if so
equipped. Scrub them with alcohol to remove any surface contaminants then swipe the
tops with the adhesive promoter provided.

2. You have been provided with 2'' furry Velcro attachment cookies for each cap. Peel the
release liner from the back of each cookie and firmly set them to the top of each factory
cap.

3. The factory wind shield washer fluid cap will need to be trimmed slightly in order for
the new cover to sit nice and centered. To do this, simply snip the finger tab as well as the
attachment strap off the cap with a scissor.

4. The set will contain a cap cover that is angled for the oil cap and a thinner cover for the
power steering cap. The remaining covers in your kit are for all other factory caps.
Simply set them in place.

If any questions occur during installation please call American Car Craft at

727-861-1500.

Thank you!



AMERICAN CAR CRAFT

18924 SAKERA ROAD-HUDSON FLORIDA 34667

Phone # 727-861-1500 Fax # 727-861-1520

www.americancarcraft.com